Introduction of RDF Molding Machine:
The RDF forming machine is to make the crushed straw (within 5cm) or sawdust raw material, and when the moisture content is controlled within the range of 10-25%, the rotation of the main shaft drives the pressure roller to rotate, and the centrifugal force is generated to squeeze the material from the mold hole. A machine that produces 3cm block finished products. It can be used to process industrial waste, papermaking scum, domestic garbage, agricultural and forestry waste, etc. from shoe/garment processing factories. The processed fuel rods can be used in waste-to-energy plants, cement plants and various industrial boilers. This technology is to remove non-combustible materials such as metal, glass, sand and soil from garbage by crushing and sorting domestic and industrial garbage, and remove combustible materials (such as plastic, fiber, rubber, wood, food waste, etc.) After crushing and drying, additives are added, compacted, and finally made into solid fuel.
Structure of RDF Molding Machine:
The RDF forming machine is composed of frame, motor, feed inlet, transmission system, pressure roller, ring die, electric heating ring, discharge outlet, etc.
Product advantages Of RDF Molding Machine：
Working principle of RDF Molding Machine:
The forming dies are closely arranged in a circular layout, and a material forming channel is formed between two adjacent dies. In this way, the whole machine forms a radially distributed material forming channel. The forming press wheel is driven by the main force to perform planetary motion, driving the material into the mold inlet. When the pinch wheel is gradually approaching the cutting point of the mold, the fed material is squeezed into the channel of the mold under the normal pressure of the pinch wheel, and the pressure is continuously formed in the channel. Finally, the mold is produced in the form of a finished product, completing the entire molding process.
Applicable materials: various crop straws, wood chips, sawdust, fruit shells, corn cobs, straw, wheat straw, wheat bran, branches and leaves, leather scraps, old clothes, paper mill scum, household garbage, agricultural and forestry waste, etc.
Advantages of RDF Molding Machine:
1. The number of mold holes is large and the processing capacity is large.
2. The structure is simple, the maintenance is simple and convenient, and the maintenance frequency is low.
3. Dynamic heating forming, good forming effect.
4. Automatic flip function, can reverse by itself.
5. The resource utilization of garbage is realized, which not only protects the environment, but also saves energy.
6. Low power consumption and high production efficiency.
Consultation