Bucket Elevator

Working principle of Bucket Elevator:

The hopper scoops up the material from the storage below, lifts to the top with the conveyor belt or chain, bypasses the top wheel and turns down, and the bucket elevator dumps the material into the receiving trough. The transmission belt of the bucket elevator with transmission is generally a rubber belt, which is installed on the lower or upper driving roller and the upper and lower redirecting roller. Chain-driven bucket elevators are generally equipped with two parallel transmission chains, with a pair of drive sprockets on the top or bottom, and a pair of redirection sprockets on the bottom or top. Bucket elevators are generally equipped with a casing to prevent dust from flying in the bucket elevator.

Applicable materials: Mineral powder, food, medicine, chemical industrial products, screws, nuts and other materials.

Advantages of Bucket Elevator:

1. The driving power is small. It adopts inflow feeding, induction unloading, and large-capacity hopper intensive arrangement. There is almost no feeding and digging phenomenon when the material is lifted, so there is less reactive power.

2. The lifting range is wide. This type of hoist has less requirements on the types and characteristics of materials. It can not only lift general powdery and small granular materials, but also can lift materials with high abrasiveness. It has good sealing performance and less environmental pollution.

3. Good operation reliability, advanced design principles and processing methods ensure the reliability of the whole machine operation, and the trouble-free time exceeds 20,000 hours. High lifting height. The hoist runs smoothly, so a high lifting height can be achieved.

4. The service life is long. The feeding of the hoist adopts the inflow type, and there is no need to use a bucket to dig the material, and there is little extrusion and collision between the materials. The machine is designed to ensure that the materials are rarely scattered during feeding and unloading, which reduces mechanical wear and tear.